- How many electricity units are consumed to completely charge the batteries ( both lead acid and lithium ion ) ?Units can be calcuated as follows :- Suppose it’s a Lithium Battery of 52 Volts and 26 AH, then multiply 52*26 = 1352 WH which means 1.35 KW ( 1.35 units) . Similar calculation can be used for Lead Acid with 10 % variance ( these are estimates)
- How is the Battery range estimated ?Suppose it’s a Lithium Battery of 52 Volts and 26 AH, then multiply 52*26 = 1352 W. On an average an e-scooter consumes 20 W per km, so 1352/20 = 67.6 Kms at a normal speed of 25 KM per hour ( these are estimates )
- Is there any display option of how many kms this E-Scooter has travelled (i.e., Will we know how many kms are left to travel as per remaining Battery strength)?When we switch on the key and come out of parking mode , the display will show - how many total kms the scooter has run so far. There is no option to see how many kms more it will run. It can only be seen by the Battery strength.
- How does Anti Theft feature worksIf the Anti Theft button is pressed, the motor gets locked. Then the scooter cant be moved or can't be switched on. And Anti theft alarm is also activated.
- What are the uses of all four buttons and the features of the remote
There are four buttons in the remote:-
Electric button- to start the scooter without key
Lock button- To switch off the scooter and to Lock it
Unlock button- To unlock the scooter
Bell button- to activate the anti-theft option
- Usage and significances of the symbols on the screen- Models - ONZO ONE, Eco and Green
- Motor- When there is fault or problem in the motor, the motor red light will be on.
- Accelerator- When there is problem with the accelerator wire, the accelerator red light will be on.
- ECU- When there is problem in the controller unit, the ECU red light will be on.
- . Break- Whenever you press the break, the break light is on.
- Cruise Mode- When the Cruise mode is activated in the scooter, the Cruise mode light is on.
- Parking- When there is problem in the parking button or parking mode is not working, the parking light will be on.
- Reverse- When the reverse option in the scooter is not working, the reverse light will be on.
- Gear- This shows the gear option 1,2,3.
Battery meter- It shows how much battery is left to ride the scooter.
- Speed meter- It shows how much speed you are riding a scooter, and the top speed is 25km/hrs.
Kilometer- It shows how many kms you have ridden the scooter.
- . Usage and significance of the symbols on the screen- ONZO ONE Plus
- Accelerator- When there is problem is accelerator wire, the accelerator red light is will be on.
- ECU- When there is problem in the controller unit, the ECU red light will be on.
- Break- Whenever you press the break, the break light is on.
- Gear- It shows the gear option 1,2,3.
- Battery meter- It shows how much battery is left to ride the scooter.
- Speed meter- It shows how much speed you are riding a scooter, and the top speed is 25 km/hrs.
- Kilometer- It shows how many kms you have ridden the scooter.
- What does the speed button in Onzo One plus model do?
The SPEED button is to activate the Cruise mode in E-scooter.
- While the vehicle is in parking mode in the variants - One and One Plus, what do we do to get into drive mode ?
We need to press the brake to get into drive mode
- While the vehicle is in parking mode in the variants - Green and Eco,what do we do to get into drive mode ?
We need to press the Parking button ( P ) to get into drive mode
- What will happen if we press the Parking Button ( P) again in Green and Eco variant ?
It will not go back to parking mode. We have to switch off and then switch on again through key
